Screw Generators (Hydrodynamic screws) for Hydro Power generation schemes use an Archimedes Screw pump in the reverse. The water is not pumped up but water is released down the with 2678 l/s flowing sequentially through the two screws over a total fall of around 10 meters, approximately 180 kW is generated (90 kW per screw generator). Hydrodynamic Screw Generators or Screw Generators are used to generate electricity from the discharge flows from Sewage Treatment plants in UK and, the electricity generated can be transferred back into the mains grid. This includes adjustments from the Fast-Track Review on 1st Aug 2011. Complete listing of allHydrodynamic Screw Generator
Screw which acts as a turbine, extracting hydro energy from the falling water
This Hydro-dynamic screw generators are installed in series
Table of Hydro Power Feed-In Tariff levels for the year to 31st March 2012
Hydro Energy Generation Tariff levels up to March 2012
Energy Source | Scale | Tariff (p/kWh) | Duration (years) |
Hydro | ≤15 kW | 20.9 | 20 |
Hydro | >15 – 100kW | 18.7 | 20 |
Hydro | >100kW – 2MW | 11.5 | 20 |
Hydro | >2MW – 5MW | 4.7 | 20 |
and proven means of harnessing theHydro-dynamic Screw generators offer all the usual benefits associated with screw pumpsincluding
In the modern climate where alternative “green” energy is very much in demand the
Hydrodynamic screw generator offers a simple reliable
renewable hydro energy from the flowing, or falling water of low head hydro site
No comments:
Post a Comment
Thank you for the comment