Google Analytics

Showing posts with label Archimedes screw pump. Show all posts
Showing posts with label Archimedes screw pump. Show all posts

Sunday, 13 November 2011

Untitled

Race to get the oil using Archimedean screw pump New Zealand

TAURANGA  A salvage crew back on the grounded Rena aims to remove the bulk of the fuel oil off the container ship over the next few days.

Heavy fuel recovery machinery will be lifted onto the platforms attached to the Rena today and an Archimedean screw pump will be inserted into the tank to extract the oil.

The cold oil has hardened to the consistency of Marmite, which is why the special type of screw pump is needed to get the oil out.

The Archimedean screw pump is normally used in the waste water industry to pump sewage that is full of solids mixed with the water.

Archimedes screw pumps are usually open from the top when used on land these would not be the case in these situation under water.

The Archimedean screw will have to be enclosed screw pump to stop the oil from escaping or leaking in the water,

I presume as I have not seen any images of the special Archimedean screw pump being used in the extraction of the oil

The six-strong crew were to resume pumping oil this morning after four small platforms were attached to the side of the stricken vessel.

The crew, operating from the platforms near the edge of the deck and using an Archimedes screw pump, will first work on the rear portside tank and hope to move 770 tonnes the bulk of the heavy fuel oil still on the ship to the waiting barge Awanuia.

‘‘If the weather stays fine, we will transfer the oil how long it takes, I don’t know,’’ said Bruce Anderson, Maritime New Zealand salvage unit manager.

‘‘We have to take it slowly and make sure things are set up properly.’’

The vessel’s power was off and the fuel was no longer hot it was a cold density like Marmite, and it had to be sucked from the tank into hoses attached to the Awanuia.

So far, 350 tonnes of the 1700 tonnes on board the Rena has escaped creating widespread pollution and distress along Western Bay beaches. Experts said the ship was relatively stable on the Astrolabe reef; however the structure of the ship was compromised.

Andrew Berry, of the Marine Pollution Response Service, said the two cracks on either side of the ship had joined, and there was now a large crack underneath the ship’s hull.

‘‘The ship is holding itself on the reef by its internal structure,’’ he said.

It was believed there were still 1346 tonnes of oil on board the vessel 770 tonnes in the port 5 tanks, 356 tonnes in the starboard 5 tank, which was under water and 220 tonnes in two settling tanks near the engine room.

Mr Anderson said thermal imaging had made ‘‘us confident that the oil is still in the tanks, and there has been no rupture to the one under water’’.

Six local tradesmen, four from Mount Maunganui Engineering and two from Tauranga Engineering Industries, worked through Thursday night to build the steel platforms, the size of a standard office desk.

The salvage crew, in full immersion suits and attached to a safety harness, will operate different pieces of equipment on each platform that has a handrail.

Mr Anderson said the Rena was sitting ‘‘quite nicely’’ on the Astrolabe Reef and it was becoming less likely that it would break up.

But if the rear part of the ship did split up, there was every chance that section could rest on the reef and ‘‘that’s good news for us’’ he said.

‘‘Once we got the fuel out, we will start working on (removing) the containers.’’

Mr Anderson said a light sheen hung around the Rena yesterday.

‘‘It’s not a large amount of oil. We think oil accumulated around the containers in the hold of the forward section or it came from the keel duct.’’

He said the Awanuia yesterday undertook a whole range of rehearsals

to remove the oil finding out how close it could get to the Rena and what the appropriate safety margins were.

‘‘It’s still a dangerous situation and we have to take precautionary measures,’’ Mr Anderson said.

MNZ said salvage company Svitzer was responsible for collecting the containers in the water.

Svitzer have reported they have identified 35 of the 88 that have fallen overboard.

A further 14 containers have been recovered.

So far a total of 376 tonnes of waste have been removed. Waste is then being trucked to Hamilton for safe disposal.

The waste is being collected by two companies working through a consented waste management plan. Potentially toxic waste from the containers is also being disposed of through the consented waste management process.

Because of the change in wind, training was being co-ordinated for teams based in the Eastern Bay of Plenty.

This would ensure the response is ready for oil grounding there, national on-scene commander Nick Quinn said.

Beach access is restricted between Mount Maunganui and Maketu Point, including the Maketu Estuary.

This is to minimise, as much as possible, further environmental damage.

Booms have also been put in place in Waipu Bay and Waikareao Estuary.

The Waipu Bay boom extends across the mouth of the inner harbour from the boat ramp to the Tauranga Bridge marina.

There are two booms in place in Waikareao Estuary near the Tauranga underwater club.

The booms are bright orange and will be visible during daylight hours.

People are also advised not to eat fin fish, shellfish or whitebait from affected areas, including the harbour.

Health warnings are being issued to prepare residents for worsening smells from the oil.

MNZ said the oil spillage on the beaches, combined with the current weather conditions, had produced a noticeable smell in some areas.

This smell is likely to diminish over a period of one or two hours from the time the oil reaches the beach.

Race to get the oil using Archimedean screw pump New Zealand

http://pumpandgenerator.com/race-to-get-the-oil-using-archimedean-screw-pump-new-zealand/

http://pumpandgenerator.com/race-to-get-the-oil-using-archimedean-screw-pump-new-zealand/

http://pumpandgenerator.com

Sunday, 2 October 2011

Modern Archimedes Screw

Modern Archimedes Hydro Screw

Archimedean screw turbines

The modern Archimedes hydro screw is used as Archimedes screw pumps and Archimedean screw turbines or 

.

 

Archimedes screw pumps can lift large volumes of water against low heads, and so is popular for use in drainage systems in flat countries like The Netherlands.

Archimedes screws are popular in sewage treatment and waste water plants because they cope well with varying rates of flow and with suspended solids.

 

Basically, the Archimedes screw consists of an inclined shaft to which one or more helically wound blades are attached. This spiral is fitted into a semi-circular or circular casing called the trough. When the screw is rotated, the water confined between two successive blades, the wall of the casing, and the shaft is lifted.

Archimedes screw pumps and generators

Archimedes screw pumps and generators at Tees Barrage London

               Figure above of an Archimedean hydro screw pump, open screw type 

 

Archimedes screw Turbine/Archimedean Screw Generator

 

Is the Reverse action of Archimedes hydro screw pump

If water is poured into the top of an Archimedes screw, it will force the screw to rotate. The rotating shaft can then be used to drive an electric generator. Archimedes screw Turbine installation has the same benefits as using the screw for pumping: the ability to handle very dirty water and widely varying rates of flow at high efficiency. There are tens of reverse Archimedes screw micro hydro schemes operating in England.

 

The Archimedes hydro screw generator is Fish Friendly and safe for fish to pass through and can serve as a fish ladder.

 

Fish friendly Archimedes screw generator

The Archimedes screw generator is safe for fish to pass through

 

Image above shows a typical setup of Archimedean Screw Turbines or Archimedes Hydro Screw Generator

What is Hydrodynamic Screw

What is Hydrodynamic Screw?

Hydrodynamic screw is the Archimedes screw pump in reverse, work by making use of the energy of moving, flowing, or falling water to spin and rotate the Archimedes screw. The giant Archimedean screw is linked to a power generator which harnesses this hydro energy. it works in a very similar way to turbines and water wheels that can also be found in hydro dams or along water ways.

 

The Archimedean screw or Archimedes screw pump

the water extraction screw or screw pump has been known since ancient times. Actually it is very well known in water technology and most commonly used in the waste water and sewage industry.

 

What is new is the application of Hydrodynamic screws

which by an inversion of the energy flow in its operation, turns the Archimedes’ screw trough pump into a hydro power generator for the extraction of renewable hydro energy.

 

A hydro power generating facility makes use of the energy difference between two different levels of flowing water

by transferring the water from natural bed of the stream at the higher level to the bed at the lower level and effectively extracting its potential hydro energy, which is then made available at the rotor shaft forhydroelectric or mechanical use.

 

Hydro-dynamic screw is Eco friendly through the utilization of this hydro energy

which is left unused by nature, an energy source is tapped; with Hydro-dynamic screws help a part of our energy requirements can be covered using this renewable energy source, which would otherwise have to be covered by fossil fuels.

 

Image of hydrodynamic screw with descriptions of main components

 

The excellent properties of the hydro-dynamic screws are

its minimal disturbance to the environment, the environ-mental friendliness and long service life. The large openings in the screw flights mean that where screw generators are used in applications in which fish could be present this does not present a problem to the fish as they simply swim through slowly revolving hydrodynamic screw. They are fish friendly Indeed screw pumps which are effectively screw generators in reverse have been used as fish ladders.

 

Screw generators can be utilized anywhere where suitable flows and heads exist

other potential uses include:

  • Rivers
  • Cooling water outlets from power stations
  • Industrial process water (for example paper or steel mills)

 

A capacity of 0.1 to 5.5 cubic meter per second and a head up to 10 m, enables it to utilize hydrodynamic powers which are ruled out for turbines for reasons of cost.

 

The rotation rates of hydrodynamic screws are low

they lay between 80 min-1 for small screws and 20 min-1 for large screws.

 

With hydrodynamic screws, even minimum hydrodynamic potentials at powers from 1 kW can be made use of economically.

 

With hydrodynamic screws, fine screening installations for protecting against floating objects and fishes, needed for turbines, are not necessary.

 

Energy losses leading to a decrease in head are also done away with, likewise losses in flow rate from the screening installations, both of which can have a detrimental effect on the efficiency of the facility.

 

The constructional effort required for a hydrodynamic screw is small

compared to that required for a turbine. If the compact version of a hydrodynamic screw (hydrodynamic screw + trough + power take-off unit combined as a single unit) is used, the constructional effort can be further reduced.

 

Small hydrodynamic facilities hide an immense potential for extracting natural energy from water power

In the process, the “water” is only used and not used up. Another positive aspect is that the water becomes enriched with oxygen, which in turn improves the quality of the water downstream.

 

Hydrodynamic screws can be optimally introduced into the environment with little effort and without disturbing effects.

 

With this new product application the hydrodynamic screw a new model has been added to the classical water power generators, the waterwheels and turbines.

http://www.archimedeshydroscrew.com/what-is-hydrodynamic-screw/

 

Archimedes screw or Archimedes screw pump

Archimedes screw or Archimedes screw pump

Image of Archimedes screw

Cross section of an Archimedes screw pump

 

 

 

 

 

 

 

 

 

 

The basic principle of an Archimedes screw

Is shown in the diagram above.  If the handle at the top was turned in an anti-clockwise direction it would draw the water up from the lower level to the top.

 

The Archimedes screw pump is an example of simple machine

Application that has survived the ages to fit diverse products in the modern era. Historians date the first evidence of Archimedes screw pumps being used hundreds of years before Archimedes was born, and it is so-named because tradition suggests it was invented by Archimedes of Syracuse (287-212 BC) natural philosopher and scientist. However, archaeological evidence has led others to posit its earlier invention in Assyria (modern day Iraq) or Egypt; Archimedes simply improved upon an earlier design.

 

Archimedes screw pumps represent

The combination of two common simple machines: the inclined plane and the cylinder. The plane wraps around the cylinder, making a common screw shape. The rotation of the Archimedes screw forces liquid or small materials upwards. This movement is intended to process liquid, irrigate, move corn, and many other applications.

 

The lowest portion of the screw pump just dips into the water

And as the cylinder is turned a small quantity of water is scooped up. The inclination of the cylinder is such that at the next revolution the water is raised above the next thread, whilst the lowest thread scoops up another quantity. The successive revolutions, therefore, raise the water thread by thread until it emerges at the top of the cylinder.

Archimedes hydro screw pump

Is believed to have been invented to remove water from the hold of Greek navy ships when Archimedes worked for his cuisine the king. The revolving screw-shaped blade inside an angled pipe was turned by a handle, scooping up water and carrying it to the top.

The Archimedes screw pump had been widely used to pump water from low-lying rivers for crop irrigation since Egyptian pharos times, as it is still used to date in the Nile delta in Egypt.

Use of Archimedes screw hydro pumps

Declined after the invention of steam power, combustion engine and electricity. Until then about a quarter of the word population used the Archimedes screw pump before the industrial revolution.

http://www.archimedeshydroscrew.com/archimedes-screw-pump/

 

Who was Archimedes

Who was Archimedes?

Archimedes is generally regarded as the greatest mathematician, Inventor and scientist of Greek antiquity.

Archimedes screw or the Archimedes screw pump is his invention. Born in, Syracuse, Sicily (then part of Greece), in about287 B.C…

 

Mathematician: Archimedes was obsessed with mathematics.

He would become so involved in his work that he would forget to eat. He scribbled notes and figures on any available surface. When outside, he used a stick to draw on the ground; when inside, he used his finger to trace figures in the olive oil on his skin.

 

Out of this obsession came many of his greatest theories and proofs, such as the means for approximating square roots, the value of pi (the ratio of a circle’s circumference to its diameter), and the creation of a way to describe very large numbers. He also devised methods for calculating areas and volumes 2,000 years before the invention of calculus. In addition, Archimedes proved that the volume of a sphere is two-thirds the volume of a circumscribed cylinder. He considered this proof his greatest accomplishment and even requested that a representation of a sphere inside a cylinder be inscribed on his tomb.

 

Archimedes,Greek,Mathematician,Inventor,scientist,Greek antiquity

Image of Archimedes Greek Mathematician

 

Scientist: Archimedes laws of flotation, Archimedes principle of buoyancy.

Legend has it that Archimedes discovered the hydrostatic principle while in the bath, where he noticed that the more of his body he submerged in the water, the greater the amount of water that over-flowed the bath. Upon making this discovery, he is said to have run naked through the streets of Syracuse, shouting “Eureka!” (Greek for “I have found it!”).  

 

Archimedes screw,Archimedes screw pump,Archimedean screw pump

Image above shows how the ancient Archimedean screw pump

 

Inventor: Archimedes screw is his most enduring invention an inventive device for raising water/lift water.

 

Archimedes screw pump is used to lift water,

popularly known as the Archimedean screw pump that is still used in crop irrigation and sewage treatment plants even today

Archimedes is believed to have seen screw pumps in use on rive Nile delta when he studied in Alexandria, Egypt

 

Greek: Archimedes lived and worked in Syracuse, Sicily (then part of Greece), in about 287 B.C

He invented “engines of war” When the Romans invaded Syracuse in 214 B.C.,to defend the city, including cranes to drop rocks, claws to lift ships from the water, and machines to fire wooden missiles. He also devised a system of mirrors that focused the sun’s light on enemy ships, setting the ships on fire.

 

Archimedes,Syracuse,Sicily,Greace

Syracuse, Sicily (then part of Greece), in about 287 B.C..

 

After the Romans successfully captured the city in 212 B.C., Archimedes was killed by a Roman infantryman during the attack of the city after he allegedly told the soldier, “Don’t disturb my circles”—a reference to a series of figures Archimedes had outlined in the sand. As he wished, Archimedes’ tombstone is marked with the figure of a sphere enclosed by a cylinder and the 2:3 ratios of their volumes. Archimedes was killed by a Roman soldier who did not know who he was.

 

Archimedes screw turbine and Archimedean screw generator

Archimedes screws and Archimedean screw pumps

are centuries old and widely used in the waste water/sewage industry is now being used to generate green renewable energy in the form of hydro electricity.

 

The Archimedes screw turbine and Archimedean screw generator

a relatively new comer is gradually becoming popular and getting some much needed publicity. Just yesterday 24th August 2011 Windsor castle announced to the BBC News that four Archimedes screw generators are going to provide the Queens residence its own Hydroelectricity . Making it the first royal palace to adopted the Government Feed In Tariffs (FITs) that pays individuals to generate Renewable Energy.

Archimedes screw generator or Archimedes hydro screws

are now operating and generation hydro-electric power for one of the  2012 London Olympic venues , working as both screw pumps and screw  turbines / generators.  

 

Archimedes hydro screw website is an online marketing channel for Archimedes screw businesses to promote your products and services to the world.

 

Amplify the features and benefits of your

Archimedes Screws |Archimedes Screw Pumps | Archimedean Screw TurbinesHydrodynamic Screws |Hydrodynamic Screw Turbines |Hydrodynamic Screw Generators |Archimedes Screw Generators

to the world for free.

 


Use full links for anyone considering Micro-Hydro Power

 

 

Micro-hydro generation| Hydro-electric power

The Microgeneration Certification Scheme

British Hydropower Association

Micro Hydro Association

Department of Energy & Climate Change

Energy Saving Trust

Ofgem

Feed-In Tariffs

 

How to measure river flow:

Ehow

Geography site

Wikipedia

Answers yahoo

 

River flow information:

Environment Agency

Centre for Ecology & Hydrology

Your local measuring stations

 

Archimedes hydro screw is unique as it can be used as both screw pumps and screw turbines or hydrodynamic generators.

Fill in your name and email, and we will send you a notification and a special offer.